Custom & Speed Parts - Online-Shop for VW Beetle, Bus, Thing, Type-3, Karmann Ghia and Porsche 356 - Custom & Speed Parts CSP
Shop  »  News  »  Cagero

Accelerator Cable Tube with Guide Roller

Beetle, Karmann Ghia, Bus and Thing
Accelerator Cable Tube with Guide Roller
Bild 1   Pic 2   Pic 3   Pic 4  

Almost everyone owning a Beetle, Karmann Ghia (Type-14), Thing (Type-181) or Type-2 Bus (Splitscreen and Bay Window) from '66 onwards, running a Type-1 engine with dual carbs and cross bar linkage, knows the problem: More often than not the gas cable gets bent when connected to the linkage. Reason for this are badly constructed crossbar linkages, manifolds in the wrong size for the linkage and/or an aftermarket fan housing with a hole for the gas cable tube in the wrong place.

This problem can easily be solved with the Cagero accelerator cable tube and guide roller.

The tube is made out of Aluminum and features a brass roller and a needle bearing on one side, a plastic abrasion protection on the other side. With that the gas cable is guided perfectly. The black anodized tube has to be mounted with a tapping screw (included) and therefor you have to drill a 3 mm hole in the fan housing.

Made in Switzerland!

p65warning Warning: Using this product can expose you to chemicals which is known to the state of California to cause cancer and cause birth defects and/or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Grommet Accelerator Tube Type-1 '66-
This little rubber grommet can be found at the bell housing cover and the fan shroud (at the alternat
show details
Accelerator Cable Tube Plug
for Original Doghouse Fanshrouds
show details
Sleeve, Accelerator Cable
Beetle / Karmann Ghia
show details
Sleeve, Accelerator Cable
Thing (181)
show details
Accelerator Cable
Beetle
show details
Accelerator Cable Bus
show details